Guide to Fix Netgear Router Guest Network Not Working Issue

Enabling the Netgear guest network feature is an excellent solution for users who want to protect the primary network of their wireless routers. But, at times, many users come across the Netgear router guest network not working issue while trying to enable the feature. If you are one of those users, then Google has helped you come to the right post. For your information, in case you have Netgear AC1750 setup at your place and are worried whether these hacks can be implemented, know that they can. Thus, wait no more and get down to reading this instant.

[Fixed] Netgear Router Guest Network Not Working Issue

Netgear Router

Can Check: What role does Ethernet have in industrial networks?

1. Give the Netgear Router a New Start

The biggest reason why you are struggling because of the Netgear router guest network not working issue is because of technical glitches. Sometimes there is nothing wrong with your device but technical glitches just make the user assume something is wrong.

However, the good news is that technical glitches can be eliminated. There is no doubt about the fact that you worried about how the process can be carried forward. Well, by rebooting. Rebooting is just a fancy word for restarting. Thus, you need to restart your device.

In order to restart your device, unplugging your device from its socket, waiting for some time, and then, plugging it back into its wall outlet is required. Once you are done restarting your device, check if the Netgear router guest network not working issue has been fixed.

2. Check the Internet Connection

Despite restarting your Netgear Nighthawk router, if you are still facing the Netgear router guest network not working issue, it is because your internet connection is weak. How good your internet connection is totally dependent on how well your devices are connected.

If the connection between the router and the existing modem is loose, then you are bound to experience the Netgear router guest network not working issue. This might have occurred because you have used a damaged Ethernet cable for the connection.

Therefore, you need to get your hands on a new Ethernet cable right away. Connect one end of the Ethernet cable to the router and another to the modem. This time make sure that the connection between the networking devices is finger-tight. Also, make sure that the distance between both devices is neither too much nor too less.

3. Perform Netgear Firmware Update

Last, but not least, you can also try to perform Netgear router firmware update in order to get rid of the Netgear router guest network not working issue. Not only will updating the firmware of your router will fix the issue at hand but also enhance its overall performance.

Therefore, without wasting any more, you should update the firmware of your Netgear wireless router. To execute the process, you can either use the Manual method or the Nighthawk application. The choice is yours.

If you want to get a glimpse of the steps to execute this process, it is recommended that you refer to the Netgear user manual. Starting from top to bottom, you will find every detail regarding your Netgear Nighthawk router in there.

Wrap Up

After following the hacks mentioned in this post, you will be able to fix the Netgear router guest network not working issue. In case you are unable to do so, then you are left with no other option than to reset your device. After that, set it up again via

If you face the not working issue while doing so, use the default IP address to set up your Netgear Nighthawk router. Trust us that will surely help you out.

Also check: How to Power Cycle Your Netgear AC750 Router?

Leave a Reply

Your email address will not be published.